Celebrating 30 years of Service!

  • Specially compounded to retain flexibility in extremely low temperatures down to -60°F (-51°C).
  • Excellent cut and gouge resistance, superior abrasion resistance.


Copyright 2015 Dunrite Rubber & Plastic All Rights Reserved.
Sudbury Branch
200 Fielding Road
Lively, Ontario P3Y 1L6
Phone: (705) 682-3233
Fax: (705) 682-3337
Hamilton Branch
161 Brockley Drive
Hamilton, Ontario L8E 3C4
Phone: (905) 578-6807
Fax: (905) 578-9050
Timmins Branch
28 Hallnor Road
Porcupine, Ontario P0N 1C0
Phone: (705) 235-2003
Fax: (705) 235-4346
  • A premium cover with heat and oil resistance.
  • Good abrasion resistance to 350°F (177°C).
  • Recommended for hot asphalt paving mix, carbon pitch mixes, and hot service conditions involving petroleum-based products.

HeatKing® OR

  • Top quality, heat-resistant compound for temperatures up to 450°F (232°C).
  • Ideal to resist the baking and cracking action of hot fine materials such as salt, ash, carbon black, foundry sand, coke, cinders, castings, and slag.

Super HeatKing® BT

  • Designed for maximum resistance to the effects of hot abrasive loads.
  • Recommended for hot fines to 400°F (204°C) or loads of coarse material to 450°F (232°C), such as clinker, calcined lime, carbon black, and foundry sand.

EPDM Hot Service

HeatKing® RA

  • Economical and long lasting.
  • For service in handling rough, abrasive materials up to 300°F (150°C): fertilizer, salt, cement, coke, slag, and steel processing.

Heat Resistant

* According to Rubber Manufacturers association Test 808.1
** Mine Safety and Health Administration designation 28-9
  • Resistance to the deteriorating effects of materials lightly treated with oil.
  • Flame-resistant and static-conductive.
  • Designated safe in mining applications.**
  • Neoprene compounds for cover and carcass.
  • Oil resistant, abrasion resistant, flame resistant and static-conductive. 
  • Designed for underground applications: mines, power plants, electrical utilities, coal cleaning plants—wherever material may be oily or oil-treated.
  • Designated safe in mining applications.**
  • Fire-resistant and oil-resistant.
  • Static conductivity is less than one megohm of electrical resistance.*
  • Formulated for conveying grain products where dust suppression systems are utilized.
  • Designated safe in mining applications.**


  • Increased resistance to the deteriorating effects of materials such as coal treated lightly with oil.
  • Flame resistant and static conductive.
  • Designated safe in mining applications.**



  • Fire-resistant, oil resistant and abrasion resistant.
  • Static conductivity is less than one megohm of electrical resistance.* 
  • Oil resistance ideal for milo, corn, whole soy-beans, linseed, cottonseed, and peanuts, and in conveying coal where some oil resistance is required.
  • Designated safe in mining applications.**

Fire & Oil Resistant

  • Oil resistance prevents sponginess and swelling caused by oily materials such as petroleum-based oils, sludge, sewage and waste materials.


  • Excellent oil resistance, withstands deterioration.
  • Ideal for applications involving wood pitch and high terpene southern pine chips, oily grains such as flaxseed, soybeans, rice, milo, corn, cottonseed, or oil-treated materials.
  • Economical, static conductive, and moderately oil and abrasion resistant.
  • Recommended for handling grain, wood chips and other lightweight materials.


  • Tough, abrasion- and fire-resistant compound for underground coal handling.
  • Static conductivity is less than one megohm of electrical resistance.* 

*Designated safe in mining applications


Fire Resistant

Oil Resistant


FLAMEOUT® Neoprene


Call The Experts

Cold Weather

  • RMA Grade I rubber compound.
  • Superior resistance to cutting, gouging and tearing from the impact of large materials.
  • High abrasion resistance and excellent low temperature flexibility.
  • Recommended for service with all kinds of hard, sharp ores; quartz, trap rock, riprap, granite, glass cullet, scrap metal, ballast, etc.

Garlock Cover Compounds


  • RMA Grade II rubber compound.
  • Durable and long-lasting in abrasive applications.
  • Resistant to cuts and gouges, flexible at lower temperatures.
  • Recommended in rugged applications not requiring the superior resistance of DULON® 600.
  • Ideal for conveying sand and gravel, lime stone, crushed rock, slag, coke, coal, cement rock, phosphate rock and most material weighing between 50 and 120 lbs. per cubic foot.

DULON® 600 Grade I


Garlock Cover Compounds